TECHLUSION ???

Aprilia RiderSite (Riders Site) - The independent & international community website for Aprilia motorcycle riders with chat, discussion forums and much more: Mille RSV1000 : TECHLUSION ???
By Eddie on Wednesday, November 13, 2002 - 10:32 am:  View Eddie's Profile Search for other posts by Eddie Edit this post

Hi guys any body had it fitted ?, what were the results before and after ?

ED  

By Nbrsv on Wednesday, November 13, 2002 - 12:32 pm:  View Nbrsv's Profile Search for other posts by Nbrsv Edit this post

yep, i had one fitted to my 02 mille.

no huge dyno increases but the mid range is definitely stronger. now puts out 119 hp max at the wheel (with a wolf race can) which is about 3-4 hp up on before techlusion fitted

it's also a lot cheaper than pc3, had mine fitted by TTS engineering in silverstone (good guys) 

By Mr_Venjer on Thursday, November 14, 2002 - 05:59 am:  View Mr_Venjer's Profile Search for other posts by Mr_Venjer Edit this post

I read about this somewhere. I think I will take a visit to Silverstone and have a butchers. I need the EXTRA power you know, riding on the limit like I do - NOT !!

Kevin 

By Rsmilly on Thursday, November 14, 2002 - 07:11 am:  View Rsmilly's Profile Search for other posts by Rsmilly Edit this post

i hear tts performance are fitting them free with dyno set up if you buy before christmas ,how long did it take to fit +set up , i may be interested in one as an altenitive to a pc111 

By Nbrsv on Thursday, November 14, 2002 - 12:08 pm:  View Nbrsv's Profile Search for other posts by Nbrsv Edit this post

i was talking to the tts guy (richard) at the bike show today and he says they are still fitting them free (think i paid 150+vat).

dont know why you would want one if you have a pc3 already as they basically do the same thing (apparently also designed by the same bloke).

set up and dyno took three hours. pleased with results and cheaper than other fuel injection boxes so i'm happy 

By Benw on Friday, November 15, 2002 - 12:26 am:  View Benw's Profile Search for other posts by Benw Edit this post

They don't do the same thing as a PCIII. They can only ADD fuel. You don't have the capacity to REMOVE fuel. Great if your bike needs richening up in several areas in the fuelling map but if it's too rich already, you can't do anything about it!  

By Nbrsv on Friday, November 15, 2002 - 12:38 am:  View Nbrsv's Profile Search for other posts by Nbrsv Edit this post

yep good point. so it does some of the things the same as a pc111, not all.

but if you are adding a can and/or airbox mostly you will be adding fuel to compensate for the better "breathing" of the bike

but hey like all these things a lot of it is subjective and down to taste (and budget). which is why people ask questions on these boards and get other opinions. then we make our own mind up how / where to part with our hard earned.

i'm happy with mine 

By Powermaster on Sunday, November 17, 2002 - 12:33 pm:  View Powermaster's Profile Search for other posts by Powermaster Edit this post

Ben, here is a good test, PC vs Tec vs eprom.
My money is on the chip + vinegar  

By Befbever on Sunday, November 17, 2002 - 12:49 pm:  View Befbever's Profile Search for other posts by Befbever Edit this post


 

By Klingon on Monday, November 18, 2002 - 02:31 pm:  View Klingon's Profile Search for other posts by Klingon Edit this post

Other time drinking Befb...
 


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password:

< <  back to previous page

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation