By Mr_Venjer on Wednesday, July 03, 2002 - 06:46 am:

People, I want to prove a point about some horrid things that have been said on other sites regarding Renegade's full system being "lower than stock" !! Bollox !

But more than having a slanging match and a "my system is better than yours" argument I have decided on a fact finding day.

What I want to do is collate as much information as possible on the Mille's accessories, exhausts, airboxes, chips etc. I want to do same dyno - same day - same operator back to back tests and post the results as a base to work from.

I will be donating my 2001 RSVR for the day. I will also be paying for the dyno runs (putting my money where my mouth is) !!
Either PDQ or another place that Diablo Mille R is trying to sort are the suggested dyno operators.

Parts donated so far:
Rene twin level slip ons
Rene airbox kit
Rene chip
standard chip
Raceco slip on
Standard airbox
RSC Ti can and chip

I am looking for lots of cans to be dynoed. Do not be afraid. Come along and donate a part, see it tested then take it with you.

The more that get involved the more comprehensive the results.

An exact date has not been selected but it WILL be on a saturday at least 1 month from now (previous commitments).

Thanks

Kevin  

By Webhamster on Wednesday, July 03, 2002 - 07:52 am:

Top plan m8!  

By Richandall on Wednesday, July 03, 2002 - 07:58 am:

Hi Mr Venjer (I just found the j on my keyboard)

I'd really like to be there too. I'm a falconeer but the story's the same. Any other falcos want to do this and get the full picture?

Btw where is this happening?

- Rich

 

By Bonerp on Wednesday, July 03, 2002 - 11:23 pm:

If its not the opposite end of the country to moi (Wiltshire), I'll let you use my Leo tit can and Evo filter is you want it?

let me know son.
Paul  

By Mr_Venjer on Thursday, July 04, 2002 - 12:19 am:

Thanks boys. I first suggested PDQ in Maidenhead but Diablo Mille R (Rich) has suggested another, west of London that Screech or Singlesman uses. Any thoughts on this would be appreciated. This will take most of the day and lots of dyno runs, if we can get a deal on multiple dyno runs that would help my pocket

Kevin 

By Bonerp on Thursday, July 04, 2002 - 12:47 am:

Sounds good. Let me know if you want the Leo and Evo to test.  

By Mr_Venjer on Thursday, July 04, 2002 - 03:48 am:

Thats a definate.

So far we have a Leo Vinci, Raceco, RSC Ti, twin Rene slip ons.

We also have an Evo airbox thing, a Rene airbox thing, a standard airbox, a PCIII.

Come on guys/gals with full systems, where are you ??

Kevin  

By Crmc33 on Tuesday, July 09, 2002 - 02:46 am:

whatever Dyno you use make sure it has a Fan the size of a very large thing. 

By Webhamster on Tuesday, July 09, 2002 - 04:30 am:

I don't know much about Dynos, but it occurs to me that a dyno should replicate 'the road' as far as possible.

Therefore if it doesn't have a fan to replicate the normal through current you'd normally get ... it's going to be a bit crap.

Isn't it?  

By Deksawyer on Monday, July 15, 2002 - 02:14 pm:

Kev, you're more than welcome to test my Arrow slip on, minus chip I'm afraid because I fooked my standard one when fitting the Arrow, but it's designed to work with the OEM chip anyway.

Let me know if you want it sent anywhere and I'll stick it in the post. (I live in Scotland, so won't be attending).

If you were to wait a month or two, then I'd bring down the Tigcrafts that I'll be ordering soon (fecking insurance claims!!!).

How about Angelo supplying a system to be tested??

D.  

By Taffrsv on Monday, July 15, 2002 - 02:19 pm:

Sorry guys my RSC can and chip are sold, so can't donate them now.  

By Mr_Venjer on Wednesday, July 17, 2002 - 03:29 am:

Thanks boys. Fair enough Taff.

Any ideas on when and where ? I am going to Amsterdam on the 26th July so any saturday after that is good with me.

I have not seen anything from Rich about the alternative dyno tester so PDQ is looking the most likely still.

Kevin  

By Bonerp on Wednesday, July 17, 2002 - 05:18 am:

Kevin,
Theres another good one in Basingstoke called...can't remember.
Poo! Sorry!
P  

By Diablo_Mille_R on Wednesday, July 17, 2002 - 06:30 am:

Sorry Kev, baby arrived 4th July, totally snowed under hence i've been very quiet on the net groups and email. I still have not found out the name of the place. Have you checked MCN Bikemart, I think they have a dyno shop listings section. PDQ are damn good but one of the most expensive places!

Later,
Rich  

By Bonerp on Wednesday, July 17, 2002 - 11:18 pm:

Nice one Rich, congrats.

Please don't tell me about sleepless nights and dirty nappies, cos mines not too far off now! 

By Mr_Venjer on Wednesday, July 17, 2002 - 11:27 pm:

Go on Rich - well done my son. I am obviously a jaffa - 31 and no bebes yet !!

Kevin 

By Crmc33 on Wednesday, July 17, 2002 - 11:46 pm:

DMR Heres a Top Tip....
A cherry stone cushion heated in the microwave for 30 seconds gives instant relief for your baby's trapped wind.
My son Luke was born in March and came home on the Sunday of the first WSB round. My Sperm must have expert timing...he's not missed a round yet!

Many congrats. 

By Crmc33 on Wednesday, July 17, 2002 - 11:48 pm:

Oh yes where were we?

Dyno shootouts.

Or are baby colic remedies more interwesting? 

By Diablo_Mille_R on Friday, July 26, 2002 - 04:53 am:

OK, I've got 5 mins so here is a list of dyno places around London for you MrV. Note that I think PDQ do not do dyno runs on weekends....

Lloyd Cooper Watford 01923 240203 ask for Dave

St Albans Dyno 01727 839627 (dynojet 250)

Road & Track Aylesbury 01296 424248

Brands Hatch Performance 01474 879331

X Bikes, Staples Corner NW London 020 8450 9779


Sorry for the delay.....
Rich  

By Powermaster on Friday, July 26, 2002 - 05:58 am:

Renegade Brands Hatch  

By Diablo_Mille_R on Friday, July 26, 2002 - 06:19 am:

You'd have to disconnect the magic button though 

By Mr_Venjer on Wednesday, July 31, 2002 - 12:06 pm:

For the record I managed 151mph last weekend in Holland. I am not amused !!

Maybe this is a job for trading standards. I mean, if 9stone fukkers are the only ones who can get 150 plus then I want to know what 15stone fukkers are meant to do.

Rich, thanks for the info, I'll call them this week. How is the bebe ?

Ciao 

By Crmc33 on Wednesday, July 31, 2002 - 01:01 pm:

me Falco does 162 in top but Im not a 15 stone fcuker.

Im a 14st 10 fcuker! 

By Diablo_Mille_R on Wednesday, July 31, 2002 - 11:15 pm:

Hi MrV,

Bebe is doing bebe stuff, IE crying, feeding (where do they put it all?) pushing it all out the other end anon....

151 is better, but still low I think. Maybe this dyno shootout will show something up, my bike pulls 150+ with no problems, even from a top gear roll on from 40mph and I'm certainly no 9st jockey

Keep us informed....

Rich 

By Wosser on Monday, August 05, 2002 - 12:31 pm:

Mr_Venjer
I managed 165 with bagalux on the back in france and 17t front sprocket it would not go any faster tried a dozen times, 6th seems like an overdrive and goes no where near the red bit, might be faster with the 16t as ime sure it will pull top gear to the red.
You do need a very long stretch of road thou.
Regs wosser